The Benefits of a Central AC Unit
Central air conditioning systems make use of ductwork to distribute cooled air throughout each room. Airflow is regulated by an air handler that includes a filter for capturing particulates.
The unit is usually located in a small enclosure located outside of the house. Its quiet operation increases your comfort by preventing constant hum or whir of window AC units from disrupting the peace of your home.
Energy Efficiency
Although central air conditioners consume more energy than wall-mounted units, modern systems are more efficient than ones of the past. The refrigerant that ozone depletes R22 was phased out in 2006 and replaced with an environmentally friendly product called 410A, and manufacturers are constantly developing new technologies that help their systems consume less energy.
Central AC systems, unlike window AC units, which are made to cool only the area in which they’re installed they can spread cool air evenly throughout your home using air ducts. The cooling process starts when your thermostat signals that the air handler needs to begin cycling. The air handler pulls hot air from your home, then passes it through the evaporator coil which is filled with cool refrigerant. The heat that’s in the air causes the refrigerant to absorb energy, and then turn into gas. The compressor then increases the temperature and pressure of the refrigerant. When it pumps it, it carries the heat out of the evaporator coil back into the home to be cooled and circulated through the ductwork.
Central AC systems are most efficient when it comes to regulating the temperature in large areas. They can consistently cool rooms that are further away than a single wall AC unit could and provide greater energy efficiency overall.
Depending on how well your house is sealed and insulated, and the layout of your home it is possible that a mini-split system could save you more energy than central air conditioning however. Mini-splits are different from central ACs, however they are more efficient because they do not rely on ductwork. Ductwork leaks and could make the system overwork to cool your home to the desired temperature. If you’re interested in finding out more about energy-efficient options for cooling your home, you should talk to an HVAC expert at your local Dallas heating and air conditioning company. They can assist you in finding the ideal solution for your needs.
Convenience
In addition to the energy efficiency and comfort, central air conditioning systems provide many benefits. They can cool a whole home or office in just one unit, and don’t require ducts as window units do. They also typically come with top-quality air filters that can help keep allergens and pollutants out of the air. This is particularly helpful for those who suffer from allergies or respiratory conditions.
Central AC is a popular cooling system, and for good reason. It’s ideal for homes with ductwork and need a powerful cooling solution. These systems can supply cool air to every room from a single vent. They can also be paired with home zone control, which allows you to manage your cooling requirements in various areas of your home with the help of a smart thermostat.
This is the most commonly used kind of AC system and operates similarly as furnaces. Central air conditioners are comprised of a large outdoor unit that blows warm air, and a smaller indoor unit that pulls cold or hot air out of the ductwork. The refrigerant flows from the air handler through the lines, which absorb heat. The cooled air then is pushed back into air handler, and then circulated to other rooms through the ductwork.
Another benefit of a central air conditioning system is that it can help to reduce humidity. This is especially crucial in our humid climate. The air handler will remove excess moisture from your ductwork and then release it to the outside. This helps prevent mold and mildew from growing.
It’s time to upgrade your cooling system if older than 15 years. A new, high-quality AC system will help you save money on energy bills and will help ensure the integrity of your home’s ductwork. Contact Chancey & Reynolds to learn more about our cooling solutions. We can assist you in selecting the right air conditioner for your budget and needs.
Maintenance
Your air conditioner, like any other major appliance, needs regular maintenance to run smoothly. Certain routine maintenance tasks can be handled by the homeowner, while other chores should be left to qualified experts. Signing up for a maintenance agreement is the best way to be on the top of AC problems. These agreements usually offer discounts on repairs as well as perks, such as priority scheduling.
Clean the Condenser Unit
A condenser unit that is dirty can hinder air flow, decrease the efficiency of the system and increase energy costs. Before you begin cleaning, turn off your compressor unit to prevent dirt and debris from accumulating. Then with a garden hose, gently clean the fan blades and coil fins to get rid of dirt leaves, twigs, twigs and other debris. After washing using a paper towel and spray for sanitation to wipe and sanitize the fan blades. It’s also recommended to straighten out any noticeable bent fins, which could be caused by winds or other weather conditions.
Line Sets
If your central air conditioner is over 10 years old, you must have a professional inspect the line sets, the copper tubes connecting the indoor air conditioning evaporator coil and the outdoor compressor and condenser unit. The lines are filled with refrigerant. any corrosion or cracks can result in leaks, which could result in a decrease in cooling and higher cost of energy.
Air Filter
Change your air filter frequently to ensure that it is fresh and improve the performance of your air conditioning system. The frequency of change varies based on the frequency at which the AC is running, the number of furry family members and how much dust is accumulated in your home. In general, a standard air filter will last for about two weeks or a month during the cooling season.
Condensate Drain Line
If the condensation drain line is blocked by mold, algae, snails, or bugs the line won’t flush out the water that’s collected by your evaporator coil in cooling. This can result in a flood-prone home, water damage, and the development of mildew and mold. The float switch in your indoor coil will shut off the system when it detects a blockage in the drain line.